S-1 Magnetic Level Gauge is a long lasting, pressure resisted device which can be used in several liquids with different densities and easily monitored with its special design.
S-1 Magnetic Level Gauge works with the principle of computational fluid and lifting force of liquids. The liquid inside the tank to which the device is installed moves the ballcock and at the same the ballcock moves the red-white discs providing the level being monitored.
The structure that is not affected from vibration, resistance to corrosion and its option to use with several different liquids are some of the level indicator's advantages.
With the optional sensors added to the magnetic level gauge when required, the level also can be controlled.
S-1 LEVEL GAUGE OPERATING CONDITIONS
Operating Pressure-Max
:
16 bar
Operating Temperature-Max
:
180 ºC
Vibration- Max
:
100 Hz
S-1 LEVEL GAUGE AREAS OF USAGE
Maritime Industry
Fuel Tanks
Chemical Tanks
Refineries
Liquefied Gas Tanks
Subsurface Tanks
Steam Tanks
Condensation Tanks
ITEMS
N
ITEM NAME
NU
MATERIAL
1
Body
1
AISI 304 / 316
2
Connection Pipe
2
AISI 304 / 316
3
Collar
2
AISI 304 / 316
4
Flanges
2
AISI 304 / 316
5
Cap
1
AISI 304 / 316
6
Body
1
AISI 304 / 316
7
Ballcock
1
AISI 316
8
Body Seal
1
PTFE
9
Body Coupling
1
AISI 304 / 316
10
Plug Seal
1
PTFE
11
Emptying Plug
1
AISI 304 / 316
12
Gauge Profile
1
Aluminum
13
Discs
1
ABS / Nylon 6
14
Clamp Handle
1
Aluminum
15
Gauge Glass
1
Plexiglass
16
Clamp
2
AISI 304 / 316
DIMENSIONS
Body
48,3x2 mm
Connection Pipe
26,9x2 mm
Collar
3/4"
Flanges
DN20 PN16
Body Coupling
11/2"
Emptying Plug
1/2"
MODELS
TYPE: S-1/ST
S-1/ST model is used when only level monitoring is needed without any addition to the original level indicator.
TYPE: S-1/CE
With S-1/CE model magnetic level gauge, you can monitor the level in more details with a ruler added.
TYPE: S-1/OC
The S-1/SD is a level indicator model which the level can be continuously monitored with assistance of a proportional rod mounted aside that produces a 4-20mA or 0-10V output.
TYPE: S-1/SW
In S-1/SW model level gauge, the level can be controlled with the help of magnetic sensors attached to sockets in gauge profile.
TYPE: S-1/VN
Our S-1/VN level indicator model is a device type equipped with a valf in order to provide maintenance and installation easiness.
TYPE: S-1/UM
S-1/UM level gauge model is a product to be used when installing aside a tank is not possible (i.e. in subsurface tanks).
Use at automation systems with the 4-20mA / 0-10 V output feature.
Plunging from above option for subsurface tanks
Operation without being affected by vibration
Monitoring possibilty with a ruler in percent or liters.
Body coupling connection which the ballcock can be assembled & unassembled easily.
AISI 316 Stainless steel structure
Shock free convoluted design
Gravity (gr/cm3)
L (mm)
1,2...1,4
140
1,0...1,2
185
0,8...1,0
220
OPERATION AND MAINTENANCE OF S-1 MAGNETIC LEVEL GAUGE
1. It is recommended to use a valve between tank and connection flanges instead of the drain plug to facilitate mounting and maintenance when mounting the level gauge to the system.
2. To unassemble the gauge profile is not recommended unless it is a necessity. If it is necessary, it must be assembled as the original design when the connection tube is empty, ballcock is at the lowest position and all discs show white.
3. To assemble/unassemble the ballcock easily, it is recommended to mount the level guage at a level high enough from ground.
4. While mounting the ballcock, the body coupling must be pulled out, the ballcock must be placed within the tube while the arrow showing the up direction. Use caution and work slowly not to harm the ballcock during this process.
5. While mounting, the upper and lower connection valves must be open and the air inside the gauge must be discharged using the blowdown valve.
6. It is recommended to clean the by-pass tube for the equipment to operate at best performance. Cleaning period depends on the fluid type and properties.
7. If sediment and mud accumulate inside the system, it is recommended to discharge using the blowdown valve once a day.
